Digital Automatic Water Pump Controller for Single Phase Motor

Digital Water Pump Controller Single Phase Model
Model Number : SMPSC-Digital

This controller model compatible with Single Phase Motor Starter with Capacitor connection. It was continuously monitoring your water status in Overhead Tank and Reservoir both and show the water level on the LCD (Liquid Crystal Display) Display. Its have an auto-switching feature also. Our controller starts your pump when it goes empty condition and the LCD Display shows “TANK EMPTY”. After your Over Hade Tank goes full, the LCD Display shows “TANK FULL” and the controller stops your pump automatically. At the same time if you have a Reservoir (SUMP) and when the water level goes low in your reservoir our controller not to start your pump and stop the pump if it’s running condition. For this condition its showing on LCD “Low SUMP”. This feature called "Dry Run Protection". It protects your pump from burnout.

We are newly introduced a saltfree technology to extends your Sensor life. We are used stainless steel sensor prove also but we noticed the salt problem is a common issue for all branded water level controllers. That's why we are using a salt-free technology to reduce this issue and we glad to say successfully resolve this salt or iron problem.

NOTE : When you start your single phase motor starter manually its needs to hold the green button 2-3 seconds for activating the starting capacitor and after that, you need to release the green button. Every single phase motor starter has mentioned this massage below the green button on starter panel but it's not too possible every time maintain manually and for this mishandling can cause burnout your pump. Don't worry, we are glad to say our every single phase Controller automatically activates the starting capacitor for the time 2-3 seconds for every starting time when the pump starts. This feature increases your pump life and protects from burnout.